Grease and Pastels
Greases are lubricants that come in solid or semi-fluid form and are made up of base oil, thickener, and additives. The main thing that sets greases apart from oils is that they don’t tend to move away from friction points. They’re especially good for applications where liquid oils would just run off the surface but […]
Hydraulic System Oils
Hydraulic system oils play a very important role in today’s industry and are the most widely used type of oil among all industrial oils. Hydraulic oils are used to transfer power in hydraulic systems, and at the same time, they lubricate the system, facilitate heat transfer, remove dirt deposits, and protect against corrosion and rust. […]
Chain Lubricants
Chains are used to transfer the desired material horizontally or vertically. High pressures occur between the bushings, pins, and rollers of moving chains due to friction. It is essential to use the right type and high-quality chain lubricants to ensure that chains can operate smoothly and continuously even under these high stresses. The selection of […]
Open Gears and Steel Wire Ropes
Open gears and steel wire ropes are heavy-duty equipment used under the most challenging atmospheric conditions, including dirty, wet, and dusty environments, and in outdoor areas where heavy loads and high friction are present. In such demanding conditions, lubricants undoubtedly play the most critical role in protecting the equipment and ensuring seamless operation. Open gear […]
Sled Lubricants
Proper lubrication of machine tool slideways and tables has a direct impact on the surface quality of the materials being processed. The vibration-free and smooth movement of the slides depends on the stick-slip performance of the slideway oil used, as well as its ability to reduce friction, carry loads, and prevent wear. Slideway oils are […]
Automotive Oils
Automotive lubricants are indispensable products of today’s world. For transportation, travel, and machinery operation to take place, vehicles and equipment must be properly lubricated. Engine oils, gear oils, and transmission fluids fulfill this task and contribute to the uninterrupted flow of daily life. They are manufactured at the highest quality level to ensure that passenger […]
Textile Oils
The textile industry encompasses knitting, weaving, and finishing operations, where machines are constantly exposed to high speeds, wide operating temperature ranges, and chemical effects. Textile oils play a crucial role in enabling facilities to maintain low operating and maintenance costs while achieving minimum downtime in production. Textile oils are produced to superior quality standards to […]
Defoamers
Foam inhibitors are chemicals used to control or reduce the amount of foam generated during a production stage or process. Foam can cause problems in many industrial processes and applications; therefore, foam inhibitors are used to prevent or reduce foam formation.
Solvents
It is a solvent used in industrial processes for dissolving, cleaning, or processing various materials.
Rolling Oils
The products are designed with high EP and ester levels that provide high lubrication levels, enabling fine-gauge rolling. Rolling Oil is suitable for galvanizing, Galvalume, and CRCA end product quality.
Metal Surface Treatment Chemicals
Metal surface treatment is generally performed to improve the appearance of metal surfaces, increase adhesion strength, and provide resistance to corrosion. In this way, surface treatment, shaping, or changing functions are targeted.
Base Oils and Additives
In addition to its production activities, our company is also engaged in the international trade of mineral and synthetic base oils, as well as a wide variety of additives used as raw materials in the lubricants industry. API GROUP I PARAFFINIC BASE OILS (SN 70, SN 90, SN 100, SN 150, SN 500, SN 650, […]
Protective Oils
Corrosion is one of the biggest challenges in today’s industry. Unprotected bare metal surfaces exposed to atmospheric conditions undergo oxidation. This reaction not only deteriorates the material’s appearance but can also prevent it from performing its intended function. Removing permanent corrosion-protection solutions such as paint and coatings from the material’s surface is quite difficult; therefore, […]
Marine Oils
Today, more than 90% of cargo is transported by sea, making the maritime industry one of the sectors with the largest investments. To ensure that these investments are preserved for the long term without harming the environment and that operations run smoothly, the use of the right lubricants at sea is of utmost importance. Marine […]
Heat Treatment Oils
The heat treatment process is carried out to impart desired mechanical properties—such as hardness and strength—by cooling a solid material in a controlled manner. Improper execution of heat treatment can result in unsuitable hardness, excessive distortion, micro-cracking, rust formation, damage to investments, environmental issues, and even fire hazards. Choosing the correct cooling medium for heat […]
Energy Production Engines
Power generation engines are large internal combustion engines that are subjected to high stress due to the types of fuels they burn. The growing global demand for energy has increased the need for these engines. The most critical factor in ensuring long service life and low fuel consumption for power generation engines is the lubricants […]
Transformer and Insulation Oils
In transformers and certain other electrical devices, insulation oils must be used to prevent electrical discharge between surfaces with different electrical potentials. GENERAL PROPERTIES Excellent heat transfer properties due to low viscosity, effectively dissipating heat from the transformer Outstanding oxidation stability to prevent oil degradation and ensure long service life Excellent low-temperature performance, allowing transformers […]
Antifreeze and De-icers
Antifreezes are glycol-based fluids that prevent the coolant water in vehicles and equipment from freezing in cold weather and boiling in hot weather. De-icers are used to prevent and remove snow and ice accumulation on surfaces. Antifreezes and de-icers are produced to provide long service life with effective protection in the systems where they are […]
Shock Absorber Oils
Shock absorbers are components used to reduce the shocks and vibrations generated during the movement of a machine. Their working principle is based on absorbing the energy released by reacting in the opposite direction of the movement. The performance of the shock absorber oil used to reduce friction and prevent overheating during this process is […]
Pneumatic Tool and Rock Drill Oils
Pneumatic systems are mechanical systems powered by compressed air. Robotic applications and automation systems, which present lubrication challenges in today’s industry, are examples of pneumatic structures. Additionally, rock drills, indispensable hand tools in the construction industry, also operate based on this principle. Pneumatic tool and rock drill oils are produced to deliver optimum performance under […]
Circulation and General Machine Oils
Circulation oils are designed primarily for use in centralized lubrication systems at points requiring continuous lubrication, such as bearings, gears, and various machine parts. Circulation and general machine oils are produced as problem solvers to best meet the lubrication needs in various industrial applications. GENERAL PROPERTIES Available in a wide range of viscosity grades to […]
Environmentally Friendly Lubricants
Nature is valuable and will survive in the long term only if it is treated with respect and care. For applications where lubrication is necessary but there is a direct environmental risk due to possible leaks or accidental spills, the use of environmentally acceptable lubricants (EAL) is recommended. Environmentally friendly lubricants are largely produced to […]
Compressor Oils
Compressors create energy sources by mechanically increasing the pressure of air, refrigerant gases, or other chemical gases. Pressurized gases serve as important energy transfer media for many applications. Using the correct and high-quality oil is vital for the system’s efficiency and longevity. The selection of compressor oil depends on the type of compressor, the type […]
Food-Compatible Lubricants
In the food, beverage, cosmetics, and pharmaceutical industries, lubricants used in production facilities are as important as the raw materials that go into the final products. High-performance lubricants with food-grade compositions enable businesses to produce with high safety standards and meet HACCP requirements. Food-grade lubricants are classified as follows: H1: Lubricants used in environments where […]
Process Oils
Process oils are used as plasticizers, carriers, or process additives in the production of a wide variety of finished products in the chemical and manufacturing industries. Since the process oil used becomes part of the final product formulation, it directly affects the product properties. Main application areas of process oils include: Rubbers (SBR, BR, IR, […]
Mould Release Oils
Mold release is a common process performed with various mold and material combinations across many industrial sectors. The smooth execution of this process is crucial for the surface quality of the produced material. Mold release is often assisted by a lubricant used to prevent the product from sticking to the mold. Mold release oils are […]
Glass Processing Fluids
Ensuring flawless product quality demanded in glass production is closely related to the glass processing fluids used in the process. In glass operations such as cutting, edge grinding, polishing, etc., lubricants must meet expectations like long tool life, good edge quality, and extended lubrication intervals. Glass processing fluids are produced to provide optimal performance during […]
Turbine Oils
Turbines are rotating main mechanisms where fluid energy is converted into kinetic energy, commonly used in electricity generation or propulsion. With the increasing global energy demand, the necessity for energy plants to operate at high efficiency has become increasingly important. Turbine oils are among the mineral oils most exposed to oxidation and degradation, therefore the […]
Industrial Gear Oils
Gears are the most important power transmission elements responsible for transferring mechanical motion between parts. Using the correct type of gear oil not only ensures the energy efficiency of the system but also prolongs the service life of the gears. The type of gear oil to be used is determined according to the following criteria: […]
Heat Transfer Oils
Most heat transfer processes for solids, liquids, and gases in industrial systems are indirect. Heat transfer oils act as thermal carriers in this process, absorbing heat from the source (heat generator) and transferring it to the required point. Selecting the right heat transfer oil requires knowing whether the system is open or closed, the maximum […]
