Corrosion is one of the biggest challenges in today’s industry. Unprotected bare metal surfaces exposed to atmospheric conditions undergo oxidation. This reaction not only deteriorates the material’s appearance but can also prevent it from performing its intended function. Removing permanent corrosion-protection solutions such as paint and coatings from the material’s surface is quite difficult; therefore, in many applications, protective oils are preferred.

Protective oils are produced in a wide range to meet every technical requirement and to provide the desired protection period for finished products, semi-finished products, or raw materials in the industry—whether stored indoors or outdoors.

GENERAL PROPERTIES

• Exceptional resistance to acids and alkalis

• Excellent protection in salty and humid environments

• Rapidly removes water from metal surfaces

• Strong adhesion to metal due to high polarity

• Long-term structural stability in cold weather

• Leaves no stains on applied surfaces

• Non-corrosive to non-ferrous metals such as copper, brass, aluminum, zinc, and magnesium

• Economical use thanks to wide coverage and high penetration capability

• Fingerprint prevention property

• Free from barium and heavy metals

• Easily removable with suitable degreasers

SOLVENT-BASED PROTECTIVE OILS

• Thin waxy dry film-forming water-repellent protective oils

• High flash point Low-VOC and Zero-VOC water-repellent protective oils

• Thin oily film-forming water-repellent protective oils

• Transparent and colorless thin film-forming protective oils

• White rust-preventive protective oils for galvanized materials in the pipe industry

• Soft grease-like film-forming protective oils

• Thick waxy film-forming offshore protective oils providing long-term outdoor protection

MINERAL OIL-BASED PROTECTIVE OILS

• Non-drying oily film-forming protective oils

• Protective oils developed for the preservation of engine blocks

• Thixotropic oily film-forming protective oils with non-drip properties

• RPO-type protective oils for atmospheric corrosion protection in the iron-steel industry

SURFACE-COATING PROTECTIVE PRODUCTS

• Black-colored asphaltic protective products forming a solid film

• Thixotropic protective undercoating products

• Ballast tank protective products for the marine industry

WATER-MIXABLE PROTECTIVE OILS

• Mineral-based protective oils forming milky emulsions

• Synthetic protective fluids forming transparent solutions

• Ultra-concentrates providing corrosion prevention for water-based systems

VAPOR PHASE CORROSION INHIBITOR (VCI) PROTECTIVE OILS

MILITARY GRADE MIL-SPEC PROTECTIVE OILS

• MIL-PRF 32033 (VV-L-800) Gun Protective Oil

• MIL-PRF-372 (MIL-C-372) Gun Cleaning Oil

• MIL-PRF-63460 Synthetic Gun Protective and Cleaning Oil (NATO S-758 & 761)

• MIL-PRF-3150 Protective Oil

• MIL-PRF-16173 Protective Oils